Weatherdek is a PVC membrane flooring for use on deck and roof deck surfaces exposed to pedestrian traffic. Weatherdek is available in a number of different colors and patterns and creates a 100% waterproof deck surface.
Weatherdek is fully adhered to a smooth substrate using Weatherdek adhesives. Any joints in the membrane are overlapped by 1 inch and fully heat welded together to create a completely waterproof finish. The perimeters of the deck are then wrapped down over the outside edges, and wrapped up the inside walls, and mechanically fastened. See our ‘Installation’ page for more details.
Weatherdek recommends substrates of ‘Plywood’ or ‘Concrete’. Weatherdek creates a waterproof surface so the substrate should have a built-in slope to drain moisture away from the building. Weatherdek should not be installed over top of pressure-treated plywood as the treatment chemicals can stain the Weatherdek membrane.
A Weatherdek Vinyl Deck surface could last up to 15-25 years depending upon the application, exposure, and care of the deck.
Weatherdek has been supplying quality vinyl decking products for over 35 years. We’ve been around through multiple warranty cycles with proven products. This is why Weatherdek is proud to offer our customers up to 5 years of Appearance and a 15-year Waterproofing ‘Warranty’.
Typically Weatherdek is priced by the square foot, as an installed product. There are many variables that affect pricing such as product thickness or pattern, job size, and job-specific details. To learn more and receive an accurate estimate for your deck surface contact your local Weatherdek Dealer on our ‘Find a Dealer‘ page.
Possibly. Weatherdek may be able to be installed over top of your existing deck surface with some preliminary work to the existing surface such as adding plywood or removing the existing coating. ‘Contact’ your local Weatherdek dealer to discuss your specific application.
Yes – when installed according to Weatherdek installation details and procedures Weatherdek becomes a completely 100% Waterproof surface, creating a covered dry space below.
Yes – Weatherdek Plus roof-grade membranes meet ‘Building Code’ requirements as a roofing material, and can be used on flat roof areas over top of finished living space. Roof decks are a great way to extend the living space of your home to the outdoors.
Yes – Weatherdek membranes are textured to provide a non-slip footing even when wet.
Yes – all Weatherdek products are formulated with UV & Heat stabilizers and a factory-applied acrylic topcoat for additional protection and longevity.
Yes – Weatherdek membranes are formulated with state-of-the-art plasticizers that allow the membrane to remain flexible at very low temperatures. Weatherdek is regularly tested for low-temperature properties down to -40° C.
o Snow can be shoveled off a Weatherdek surface using a plastic snow shovel or a push broom. Be sure the plastic shovel does not have a metal blade.
o Rock Salt and other similar Ice Melting compounds can be used on a Weatherdek surface as long as any residue left be these products are washed off the surface with soap and rinsed well with clean water prior to the following spring/summer suns.
o It is best to clean your Weatherdek surface with a mild dish soap solution and a soft-bristle brush or broom for light scrubbing. After cleaning be sure to rinse the surface well with clean water or a garden hose.
o Also see our Weatherdek ‘Care & Cleaning’ info.
Weatherdek offers the largest selection of Vinyl decking products on the market and has been doing so for over 35 years. We have been around through numerous Warranty cycles and Weatherdek stands behind its products with proven durability.